We stand for our products with our hearts and passion.
balanced house and booth outputs.
one phono plus two line
inputs per channel.
Line: RCA 68kΩ | 20Hz-20kHz +-0.5dB
Booth: Jack Balanced 100Ω | +4dBu nominal
Rec Out: RCA Unbalanced 100Ω | -10dBV nominal
Phones: 1W into 70Ω
three band isolator per channel plus
three band isolator on the master.
20-125Hz | 125-4'000Hz | 4'000-20'000Hz
Cut -inf dB, Boost +9dB
20-280Hz | 280-4'200Hz | 4'200-20'000Hz
Cut -inf dB, Boost +9dB
industrial powder
coated housing with sub-eloxal printed aluminium faceplates.
11.81 × 9.25 × 5.98 inches
(width × depth × height)
RDM20 Technical Specification Sheet [pdf] 73 kB
HiRes Photo Front [jpg] 1.9 MB
HiRes Photo Isometric Front [jpg] 1.8 MB
HiRes Photo Side [jpg] 2.6 MB
HiRes Photo Rear [jpg] 2.9 MB
HiRes Photo Isometric Rear [jpg] 1.8 MB
The RDM40 might be just the right choice for you!
We adopted the proven three-band isolators for each individual channel as well as the master isolator from our RDM20. To allow more complex DJ setups, both at home or in club booths, we added a whole set of new features to the RDM40: Dedicated rotary knobs for gain and send are extending the mixers channel strip. The input signals are monitored by a dynamic level indication LED that turns red when the signal is too hot.
For further details on the developing process of the RDM40, please have a look on our MISSION RDM40 website.
balanced house and booth outputs.
three phono/line inputs and one line/mic input.
Line: RCA 68kΩ | 20Hz-20kHz +-0.5dB
Mic: XLR >1 kΩ | HPF 100Hz (can be deactivated)
Return: Jack 220 kΩ | 20Hz-20kHz +-0.5dB
Booth: Jack Balanced 100Ω | +4dBu nominal
Rec Out: RCA Unbalanced 100Ω | +4dBu nominal
Send (fx): Jack imp. balanced 100Ω | -4dBu nominal
Phones: 1W into 70Ω
three band isolator per channel plus
three band isolator on the master.
20-125Hz | 125-4'000Hz | 4'000-20'000Hz
Cut -inf dB, Boost +9dB
20-280Hz | 280-4'200Hz | 4'200-20'000Hz
Cut -inf dB, Boost +9dB
industrial powder
coated housing with sub-eloxal printed aluminium faceplates.
13.6 × 14.2 × 7.5 inches
(width × depth × height)
RDM40 Technical Specification Sheet [pdf] 115 kB
HiRes Photo Front [jpg] 1.0 MB
HiRes Photo Isometric Front [jpg] 1.1 MB
HiRes Photo Side [jpg] 0.6 MB
HiRes Photo Rear [jpg] 1.1 MB
HiRes Photo Isometric Rear [jpg] 0.9 MB
A disc stabilizer and an adapter for 7“ records.
Our handcrafted turntable weights work either for 12“ and 7“ records.
Anodized aluminium body with a solid brass core.
A disc stabilizer and an adapter for 7“ records.
Our handcrafted turntable weights work either for 12“ and 7“ records.
Stainless steel body with a solid brass core.
Order information
We do accept bank transfer or credit card (+3.5% fees) payments.
Additional VAT & Tax will be charged by the customs office of your country (Incoterms DAP). For customers from Switzerland 8.1% VAT will be added during the checkout.
When your unit is fully built and tested, the remaining amount is payable.
Please note that it will take up to 16-18 weeks to build your RDM20, depending on the amount of orders we're dealing with.
When your unit is fully built and tested, the remaining amount is payable.
Please note that it will take up to 18-20 weeks to build your RDM40, depending on the amount of orders we're dealing with.
Philosophy
We are a manufacture, not a big factory. On the one hand, we are dealing with higher production costs, but on the other hand, we can produce our goods with the attention they deserve.
A mixer only leaves our workshop if every single value of its specifications is within the defined tolerance. Solid hardware and high-grade electronic components are our chosen materials. This guarantees a long lifecycle.
When people order a mixer from us, we are inviting them to our workshop to pick up their new device. We show our customers where and how their mixer was built and answer them all their questions.
Contact
Ziegelackerstrasse 10
CH-3027 Bern
Switzerland